Radionice po Othmeru

Electrodes

Posted in EEG kape i elektrode

The electrodes have multiple purposes:

-          EEG recording

-          EP (evoked potential)

-          Neurofeedback training

-          Electrode for bridging due to electrode disruption on the Comby EEG Cap

Electrodes are made out of

-          Ag/AgCl plates

-          Gold plates


Colors: white,  black, red, yellow,  green and blue

Mini EEG Caps

Posted in EEG kape i elektrode

PURPOSE

Mini EEG Caps are used to record EEG and EP potential by using multi-purpose electrodes and for neurofeedback training. The electrodes are placed according to the international 10-20 system or according to recording requirements.

  • Mini EEG Caps are made in six different sizes which cover all sizes from the biggest head span to the smallest, or more precisely:
  • three children sizes
  • three adult sizes (in case a child has the head span of an adult, the adult size is used)

The caps are usually attached below the chin, and for more sensitive patients or long-term recording they can be attached using a chest harness

SIZES

ADULTS:
  • green 57-62
  • red 52-57
  • yellow 47-52
DJECA:
  • green d 42-47
  • red d 37-42
  • yellow d 32-37

PLACEMENT

The caps are selected according to the head span which is measured with the supplied special measure tape. The appropriate cap is placed on the patient’s head.

The electrodes are placed according to the international 10-20 layout or according to recording requirements.

FASTENING

The Mini EEG cap can be fastened under the patient’s chin using the Velcro straps (for routine recording), or the cap can be fastened to a chest harness (as with Comby EEG Cap) which goes under the patient’s arms (for sensitive patients, children, longer recording sessions).

CONNECTING

The electrodes are connected to the EEG device by connection wires.

MAINTENANCE

After the recording is finished, the cap should be washed in warm water with a slight solution of liquid disinfectant hand detergent (Plivasept). If there is any leftover gel on the electrodes, it should be cleaned using a cotton swab. Rinse and dry with a towel and leave to dry for the following day.

Standard EEG Caps

Posted in EEG kape i elektrode

PURPOSE

Standard EEG Caps are used to record EEG potential using bridge electrodes.

  • Standard EEG Caps are made in six different sizes which cover all sizes from the biggest head span to the smallest, or more precisely:
  • three children sizes
  • three adult sizes (in case a child has the head span of an adult, the adult size is used)

The caps are usually attached below the chin, and for more sensitive patients or long-term recording they can be attached using a chest harness.

SIZES

ADULTS:
  • green 57-62
  • red 52-57
  • yellow 47-52
CHILDREN:
  • green d 42-47
  • red d 37-42
  • yellow d 32-37
INFANTS:
  • yellow for 10 electrodes

PLACEMENT

The caps are selected according to the head span which is measured with the supplied special measure tape. The appropriate cap is placed on the patient’s head.

Bridge electrodes are installed according to the international 10-20 layout.

FASTENING

The EEG cap can be fastened under the patient’s chin using the Velcro straps (for routine recording), or the cap can be fastened to a chest harness which goes under the patient’s arms (for sensitive patients, children, longer recording sessions).

CONNECTING

The electrodes are connected to the EEG device by connection wires.

MAINTENANCE

After the recording is finished, the cap should be washed in warm water with a slight solution of liquid disinfectant hand detergent (Plivasept). If there is any leftover gel on the electrodes, it should be cleaned using a cotton swab. Rinse and dry with a towel and leave to dry for the following day.

Comby EEG Caps

Posted in EEG kape i elektrode

Comby EEG Caps are used to record EEG potential.

They are exclusively made in accordance with the international 10-20 system and the partial 10-10 system, which implies:

-          Comby EEG Caps are made in six different sizes which cover all sizes from the biggest head span to the smallest, or more precisely:

-          three children sizes (+ cap with 10 – 14 electrodes for infants)

-          three adult sizes (in case a child has the head span of an adult, the adult size is used)               

-          A specific electrode always detects a certain brain region, depending on the size of the head (its span). With every cap we provide a measure tape which is used to determine the cap size to be used.

-          According to customer requirement, caps with a different number of electrodes (from 10 to 42) can be manufactured.

COMBY EEG Caps are manufactured with gold plated electrodes and electrodes made from sintered silver chloride (Ag/AgCl), which are currently most suited for brain bio potential detection. They have low impedance and auto-potential. Their quality is reflected in excellent selectivity and stability.

To record EEG with both types of electrodes, a variety of conductive contact gels can be used.

Comby EEG Caps are connected directly via a 25-pin connector, if such a connector is supported by the device, or through an adapter cable.

The caps are usually attached below the chin, and for more sensitive patients or long-term recording they can be attached using a chest harness.

SIZES

ADULTS:
  • green 57-62
  • red 52-57
  • yellow 47-52
DJECA:
  • green d 42-47
  • red d 37-42
  • yellow d 32-37
DOJENČAD:
  • yellow d 10 with 10 electrodes

PLACEMENT

The caps are selected according to the head span which is measured with the supplied special measure tape.

The appropriate cap is placed on the patient’s head. Each electrode must be slightly raised from the head and conductive contact gel must be applied with the help of a syringe with a plastic attachment (applicator) which is also used to spread the hair and for slight abrasion of the skin. The gel must be applied only underneath the electrode (not around it, because of the possibility of a short circuit).

After placement of the cap, wait one to two minutes and then start recording.

FASTENING

The EEG cap can be fastened under the patient’s chin using the Velcro straps (for routine recording), or the cap can be fastened to a chest harness which goes under the patient’s arms (for sensitive patients, children, longer recording sessions).

CONNECTING

If the device supports a 25-pin connector, the cap is connected directly.

If the device does not support a 25-pin connector, the cap is connected through an adapter cable with DIN or 2mm plug.

MAINTENANCE

After the recording is finished, the cap should be washed in warm water with a slight solution of liquid disinfectant hand detergent (Plivasept). If there is any leftover gel on the electrodes, it should be cleaned using a cotton swab. Rinse and dry with a towel and leave to dry for the following day.

Make sure that the leftover gel does not dry on the electrode because it creates a highly resistant layer which disables recording. Sterilize the caps in a gas sterilizer if necessary.

ELECTRODES

The electrodes are made of:

•    Ag/AgCl (sintered) plates
•    Gold plates